城市场景结构感知的网格模型简化算法     

张春森  张会  郭丙轩  彭哲 《测绘学报》2020,49(3):334-342

针对二次误差测度(QEM)网格简化算法全局几何特征信息损失严重的缺点,提出一种具有结构感知功能面向城市三维模型重建的网格简化算法。该算法顾及城市影像中平面结构特征,以代理平面为全局特征约束条件,使模型在简化过程中全局结构特征更多地被保持,以利于多层次细节模型(LOD技术)、网格优化提速等模型后续操作。以倾斜摄影获取影像生成的初始三角网格模型为试验数据,采用所给算法对其进行网格简化并与QEM算法进行对比。结果表明:所给算法简化精度及简化效率均优于QEM算法。  相似文献   

基于GPS应变、地震应变率与震源应力场对帕米尔高原现今构造变形特征的分析          下载免费PDF全文

潘正洋  邵志刚  周云  王洵  解孟雨  艾萨·伊斯马伊力 《地球物理学报》2020,63(3):1143-1154

研究帕米尔高原的构造变形特征对于理解印度板块向北推挤过程中的应变分配方式以及应力转换模式具有重要的意义.本文利用区域GPS应变场、地震应变场与震源应力场分析帕米尔高原的构造形变特征.主要结论为:(1)该区域变形主要以NNW-SSE或近N-S向的挤压为主,在高原内部伴有明显的近ENE-WSW或E-W向拉张,应力方向在帕米尔高原与塔吉克盆地区域呈现逆时针旋转的趋势,而在塔里木盆地则显示几乎与帕米尔高原的一致的应力状态,这可能与两侧盆地块体的强度差异有关.(2)安德森断层参数A∅显示帕米尔高原北缘与西侧区域为逆断层应力状态,在高原内部为正断层应力状态,这与GPS应变的结果显示的应变主要集中在主帕米尔断裂与阿莱谷地附近而在高原内部应变较低是一致的,另外应力在喀喇昆仑断裂北段的方向基本平行于断层走向,以及断层北端较低的滑动速率,这说明了地壳挤压缩短可能是帕米尔高原主要的的构造变形特征,并不支持由于边界走滑断裂导致的应变分异或者块体挤出的模式.(3)综合考虑地震应变方向与SHmax从帕米尔北部NNW-SSE方向到天山北部的近N-S方向的转换,GPS应变方向在帕米尔高原两侧盆地都存在不同程度的旋转,应力场安德森参数A∅显示的应力状态以及SKS的结果显示的近ENE-WSW方向,我们认为印度板块向北推挤与天山造山带碰撞导致帕米尔高原不对称的径向逆冲是帕米尔高原现今构造变形的主要成因与构造模式.  相似文献   

Talus slope geomorphology investigated at multiple time scales from high-resolution topographic surveys and historical aerial photographs (Sanetsch Pass,Switzerland)     

Hanne Hendrickx  Lars De Sloover  Cornelis Stal  Reynald Delaloye  Jan Nyssen  Amaury Frankl 《地球表面变化过程与地形》2020,45(14):3653-3669

Talus slopes are common places for debris storage in high-mountain environments and form an important step in the alpine sediment cascade. To understand slope instabilities and sediment transfers, detailed investigations of talus slope geomorphology are needed. Therefore, this study presents a detailed analysis of a talus slope on Col du Sanetsch (Swiss Alps), which is investigated at multiple time scales using high-resolution topographic (HRT) surveys and historical aerial photographs. HRT surveys were collected during three consecutive summers (2017–2019), using uncrewed aerial vehicle (UAV) and terrestrial laser scanning (TLS) measurements. To date, very few studies exist that use HRT methods on talus slopes, especially to the extent of our study area (2 km²). Data acquisition from ground control and in situ field observations is challenging on a talus slope due to the steep terrain (30–37°) and high surface roughness. This results in a poor spatial distribution of ground control points (GCPs), causing unwanted deformation of up to 2 m in the gathered UAV-derived HRT data. The co-alignment of UAV imagery from different survey dates improved this deformation significantly, as validated by the TLS data. Sediment transfer is dominated by small-scale but widespread snow push processes. Pre-existing debris flow channels are prone to erosion and redeposition of material within the channel. A debris flow event of high magnitude occurred in the summer of 2019, as a result of several convective thunderstorms. While low-magnitude (<5,000 m³) debris flow events are frequent throughout the historical record with a return period of 10–20 years, this 2019 event exceeded all historical debris flow events since 1946 in both extent and volume. Future climate predictions show an increase of such intense precipitation events in the region, potentially altering the frequency of debris flows in the study area and changing the dominant geomorphic process which are active on such talus slopes. © 2020 John Wiley & Sons, Ltd.  相似文献   

Lidar-aided analysis of boreal forest backscatter at Ku band     

《International Journal of Applied Earth Observation and Geoinformation》2020

This paper analyzes the backscatter of the microwave signal in a boreal forest environment based on a Ku -band airborne Frequency-Modulated Continuous Waveform (FMCW) profiling radar—Tomoradar. We selected a half-managed boreal forest in the southern part of Finland for a field test. By decomposing the waveform collected by the Tomoradar, the vertical canopy structure was achieved. Based on the amplitude of the waveform, the Backscattered Energy Ratio of Canopy-to-Total (BERCT) was calculated. Meanwhile, the canopy fraction was derived from the corresponding point cloud recorded by a Velodyne VLP-16 LiDAR mounted on the same platform. Lidar-derived canopy fraction was obtained by counting the number of the first/ the strongest returns versus the total amount of returns. Qualitative and quantitative analysis of radar-derived BERCT on lidar-derived canopy fraction and canopy height are investigated. A fitted model is derived to describe the Ku-band microwave backscatter in the boreal forest to numerically analyze the proportion contributed by four factors: lidar-derived canopy fraction, radar-derived canopy height, the radar-derived distance between trees and radar sensor and other factors, from co-polarization Tomoradar measurements. The Root Mean Squared Error (RMSE) of the proposed model was 0.0958, and the coefficient of determination R2 was 0.912. The fitted model reveals that the correlation coefficient between radar-derived BERCT and lidar-derived canopy fraction is 0.84, which illustrates that lidar surface reflection explains the majority of the profiling /waveform radar response. Thus, vertical canopy structure derived from lidar can be used for the benefit of radar analysis.  相似文献   

Conjugate ruptures and seismotectonic implications of the 2019 Mindanao earthquake sequence inferred from Sentinel-1 InSAR data     

《International Journal of Applied Earth Observation and Geoinformation》2020

In 2019, four strong earthquakes of Mw>6.4 occurred successively in Mindanao, Philippines. Based on the reports from the USGS and PHIVOLCS, these earthquakes were dominated by strike-slip ruptures. Whether these earthquakes are temporally and spatially related remained unknown. We characterized the coseismic displacement fields during the earthquake sequence using an InSAR technique with Sentinel-1 SAR data. The InSAR deformation measurements convincingly reveal that the four earthquakes produced distinct coseismic displacement patterns. We estimated the source parameters of the earthquakes with a two-step inversion strategy. The optimal model suggests that the earthquake sequence resulted from the reactivation of a conjugate fault structure that involves two nearly vertical left-lateral strike-slip faults and two high-angle right-lateral strike-slip faults. We calculated Coulomb stress changes from the earthquake sequence, suggesting that the previous strong earthquakes had significant stress-encouraging effects on the following events. The regional velocities based on the GPS analysis suggest that the formation of this conjugate structure is mainly due to the westward movement of the subducting Philippine Sea Plate. This earthquake sequence provides a seismotectonic background for subsequent strong earthquakes and helps to better understand the formation mechanisms and seismotectonic implications of conjugate structure rupturing.  相似文献   

Using visibility analysis to improve point density and processing time of SfM-MVS techniques for 3D reconstruction of landforms     

Álvaro Gómez-Gutiérrez  Trent Biggs  Napoleon Gudino-Elizondo  Paz Errea  Esteban Alonso-González  Estela Nadal Romero  José Juan de Sanjosé Blasco 《地球表面变化过程与地形》2020,45(11):2524-2539

Image network geometry, including the number and orientation of images, impacts the error, coverage, and processing time of 3D terrain mapping performed using structure-from-motion and multiview-stereo (SfM-MVS). Few studies have quantified trade-offs in error and processing time or ways to optimize image acquisition in diverse topographic conditions. Here, we determine suitable camera locations for image acquisition by minimizing the occlusion produced by topography. Viewshed analysis is used to select the suitable images, which requires a preliminary digital elevation model (DEM), potential camera locations, and sensor parameters. One aerial and two ground-based image collections were used to analyse differences between SfM-MVS models produced using: (1) all available images (ALL); (2) images selected using conventional methods (CON); and (3) images selected using the viewshed analysis (VIEW). The resulting models were compared with benchmark point clouds acquired by a terrestrial laser scanner (TLS) and TLS-derived DEMs. The VIEW datasets produced denser point clouds (28–32% more points) and DEMs with up to 66% reduction in error compared with CON datasets due to reduction of gaps in the DEM. VIEW datasets reduced processing time by 37–76% compared with ALL, with no reduction in coverage or increase in error. DEMs produced with ALL and VIEW datasets had similar slope and roughness, while slight differences that may be locally important were observed for the CON dataset. The new method helps optimize SfM-MVS image collection strategies that significantly reduce the number of images required with minimal loss in coverage or accuracy over complex surfaces. © 2020 John Wiley & Sons, Ltd.  相似文献   

小尺度网格层析速度建模方法在低幅构造区时深转换中的应用     

吕振宇  魏鹏 《地球物理学进展》2020,(1):339-344

渤海M油田区浅层多发育低幅构造,低幅构造区的地震数据对常规层析成像不够敏感,导致常规速度反演方法很难保证低幅构造速度建模的准确性,从而给时深转换工作带来较大误差.本文提出一种小尺度网格层析速度建模方法,该方法基于低幅构造的薄层信息,在有薄层信息的地层加密网格分布,从而实现根据地质条件划分网格的策略,进而通过解析矩阵方程实现速度模型的迭代更新.通过实际数据应用证明,对于渤海M油田利用本文提出的高精度网格层析速度建模方法是有效可行的,该方法能够有效提高低幅构造区速度建模的精度,利用该方法得到的速度模型能够大幅提高时深转换的精度,从而指导构造解释及成图工作.  相似文献   

2016年秋季热带西太平洋网采浮游植物群落结构   总被引：1，自引：0，他引：1  

陈卓  孙军  张桂成 《海洋科学》2018,42(7):114-130

作者于2016年9月27日～10月25日对热带西太平洋(0°～20°N, 120°～130°E)10个站位的网采浮游植物群落结构进行了采样调查。应用Uterm?hl方法对调查海域浮游植物的物种组成、细胞丰度、优势物种以及群落多样性等相关生态特征进行了分析。希望为热带西太平洋提供一些基础的背景资料,为以后的研究奠定基础。结果表明, 鉴定出浮游植物共计4门、66属、243种(包括变种、变型), 含硅藻门(Bacillariophyta)34属、103种, 甲藻门(Pyrrophyta)28属、133种, 金藻门(Chrysophyta)2属、4种,蓝藻门(Cyanophyta)2属、3种。浮游植物细胞丰度1 965.573×10³ 细胞/m³ , 其中蓝藻的细胞丰度为1 945.169×10³ 细胞/m³ , 决定了浮游植物的分布格局, 占总细胞丰度的98.96%, 高值区分布在0°N130°E-10°N130°E的4个站位(E130-13、E130-15、E130-17、E130-19); 硅藻丰度在20°N断面N20-4站位存在高值区; 甲藻丰度在130°E断面的3个站位(E130-10、E130-13、E130-15)存在高值区。本次调查的优势种依次为铁氏束毛藻(Trichodesmium thiebaultii)、扁形原甲藻(Prorocentrum compressum)、扁豆原甲藻(Prorocentrum leniculatum)、胞内植生藻(Richelia intracellularis)、菱形海线藻(Thalassionema nitzschioides)、细弱海链藻(Thalassiosira subtilis)、具边线形圆筛藻(Coscinodiscus marginato-lineatus)、科氏角藻(Ceratium kofoidii)、鲁比膝沟藻(Gonyaulax lurbynaii)、中华半管藻(Hemiaulus sinensis)、霍氏半管藻(Hemiaulus hauckii)、小等刺硅鞭藻(Dictyocha fibula)。Shannon-Weiner多样性指数的均值为2.440,Pielou 均匀度指数的均值为0.163。相关分析结果显示浮游植物空间分布主要受PO₄-P、NH₄-N的影响,且由蓝藻的相关性决定的。聚类分析得出群落结构分为大洋群聚和近岸群聚两种类型(其中大洋群聚的站位又划分为0°～10°N纬度范围聚集和10°～20°N纬度范围聚集)。  相似文献   

高温高压条件下彭灌杂岩的强度对汶川地震发震机制的启示   总被引：1，自引：1，他引：0       下载免费PDF全文

牛露  周永胜  姚文明  邵同宾  马玺  党嘉祥  何昌荣 《地球物理学报》2018,61(5):1728-1740

采用汶川地震震源区彭灌杂岩中代表性细粒花岗岩样品，在固体围压介质三轴实验系统上开展了高温高压流变实验研究.实验的温度和压力条件按照龙门山断层带5~30 km深度对应的温度和压力（静岩压）设定.利用偏光显微镜和扫描电镜对实验样品进行微观结构观察.实验结果表明，实验样品在10~20 km深度都具有很高的强度，彭灌杂岩在该深度处于脆性破裂-脆塑性转化域，而在20~30 km实验样品强度显著降低，彭灌杂岩进入塑性流变域，这与流变结构中的极限强度很接近.以花岗岩为代表的彭灌杂岩的破裂强度决定了中上地壳的强度，在15~20 km深度不仅强度达到最大值，而且控制了断层不稳定滑动，具备地震成核条件.因此，把彭灌杂岩强度随深度变化规律与流变结构和滑动稳定性参数（a-b）结合起来得出，彭灌杂岩在15~20 km的高强度是汶川地震的孕育和发生的必要条件.  相似文献   

考虑地形起伏和障碍体破裂的汶川地震强地面运动数值模拟   总被引：2，自引：1，他引：1       下载免费PDF全文

赵由佳  张国宏  单新建  尹昊  屈春燕 《地球物理学报》2018,61(5):1853-1862

2008年5月12日四川汶川地区发生M_W7.9地震，震中位置103.4°E，31.06°N.这次地震造成了以汶川、映秀为中心及其周边地域建筑物的严重破坏和人员的重大伤亡，且因为高山等地形复杂区域抢险救灾的艰巨性，为及时救援造成很大干扰.为更好理解地形因素对于强地面数值模拟结果的影响，建立了包含地形起伏影响及去除地形影响的两类模型.同时，依据震源破裂过程运动学反演结果，建立了包含障碍体破裂过程的震源滑动模型，实现断层分段、空间倾角以及滑移角的动态设定.基于动力学的地震动模拟方法，通过对地震波传播过程的数值计算和后处理分析，模拟由地震激发的区域强地面运动过程.结果显示：（1）强震动台站的断层距对地形效应具有放大或抑制作用，距离断层破裂带越近，地形效应越明显，反之，距离越远，则地形效应越微弱；（2）因为地形高差与障碍体的影响，地震造成的峰值可能出现在震中区域之外；（3）考虑地形影响模型的地表峰值速度（PGV）区域位于汶川与北川附近；而未考虑地形影响模型的PGV区域位于灌县—江油断层的后半段，处清平、安县附近；对汶川地震近实时强地面运动波场的模拟、峰值图谱的圈定及未来大地震强地面运动特征的预测都有重要指示意义.  相似文献